Draeger Polytron 5200 CAT Flammable Gas Detector
The Draeger Polytron 5200 CAT is a cost effective explosion proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a catalytic bead DraegerSensor Ex … DD, which will detect most flammable gases and vapors. A 3 wire 4 to 20 mA analog output with relays makes it compatible with most control systems.
- Fast and stable – the DrägerSensor® Ex
- Same design, same operating principles
- Three relays for controlling external equipment
- Safe, robust housing for every application
- Make the impossible possible with the remote sensor
- Oil refineries/mining/OnShore/Off Shore /Water treatment Plant
- Continous monitoring of Hydrocarbon , Hydrogen Flammable Gases using Catalytic technology
- Measuement of Flammable inside the Duct upto 150degc ( Remote installation up to 30 meters Available)
- Hazardous area Application (zone 1,Zone2)
- Continous monitoring of Hygrogen in battery rooms
| Type | Explosion-proof / flameproof enclosed transmitter (“d”) or combined with increased safety (“d/e”) |
| Gases | flammable gases and vapours |
| Measuring ranges | DQ 0 to 100 % LEL , LC 0 to 10 % LEL |
| Display | Backlit 4 digit LCD; 3 Status LEDs (green/yellow/red) |
| Accuracy/repeatability | ≤ 1 % LEL |
| Response time | < 7 seconds to < 13 seconds |
| Signal output analogue | 4 to 20-mA |
| Power supply | 10 to 30 V DC, 3-wire |
| Temperature | -40 to 80 °C (-40 to 176 °F) |
| Pressure | 20.7 to 38.4 inch Hg / 700 to 1,300 mbar |
| Humidity | 0 to 100 % RH, non-condensing |
| Transmitter housing | Epoxy coated copper-free aluminum or SS316 L stainless steel |
| Sensor housing | 303 Stainless steel |
| Enclosure protection type | EMA 4X & 7, IP65/66/67 |
| Cable entry point | 3/4 NPT threads or M20 cable gland |
| Approx. Dimensions (H x W x D) | 11.0" x 5.9" x 5.1" / 280 x 150 x 130 mm |
| Weight, approx. | 4.9 lbs / 2.2 kg to 11.9 lbs / 5.4 kg |
| Approvals | UL, CSA, IECEx, ATEX, CE markings |
