Draeger Polytron 5100 Toxic Gas Detector
The Draeger Polytron 5100 EC is a cost-effective explosion-proof transmitter for the detection of toxic gases or oxygen. It uses a high performance plug-and-play electrochemical DraegerSensor to detect a specific gas. A 2 or 3-wire with 4 to 20 mA output with relays make it compatible with most control systems.
- Durable, intelligent and sensitive – the DraegerSensor
- Same design, same operating principle
- Three relays for controlling external equipment
- Safe, robust housing for every application
- Make the impossible possible with remote sensor
- Oil refineries/mining/OnShore/Off Shore /Water treatment Plant
- Normal measurment possible with 4-20mA , Hart and optional Relay
- Measuement of Toxic Gases inside the Duct ( Remote installation up to 30 meters Available)
- Hazardous area Application (zone 1,Zone2)
- Contionous monitoring of Oxygen,H2S, Confined Space Installation to monitor
- Remote installation with relay options.
| Type | Explosion-proof / flameproof enclosed transmitter (“d”) or combined with increased safety (“d/e”) |
| Gases | Toxic gases and oxygen depending on the sensor used |
| Measuring ranges | For customised adjustment, see sensor data sheet |
| Display | Backlit 4 digit LCD; 3 Status LEDs (green/yellow/red) |
| Electrical data |
|
| Environmental conditions (see sensor data sheet) |
|
| Transmitter housing | Epoxy coated copper-free aluminum or stainless steel SS316 L |
| Sensor housing | Polyamide |
| Enclosure protection type | NEMA 4X & 7, IP65/66/67 |
| Cable entry point | Two 3/4" NPT port or M20 cable gland |
| Dimensions (H x W x D) | w/o docking station - 11.0" x 5.9" x 5.1" / 280 x 150 x 130 mm |
| Approx. weight |
|
| Approvals | UL, CSA, IECEx, ATEX, CE markings |
