Draeger Flame 2350 (UV/IR) Flame Detector
The Draeger Flame 2350 uses two detection sensors that integrate UV and IR technology for hydrocarbon fire detection. Using two sensors together delivers better safety protection while reducing accidental alarm activations.
- Fast and reliable detection
- Prevention of false alarms
- Robust and resistant
- Simple check
| Type | Explosion proof UV/IR flame detector for hydrocarbon-based fuel and gas fires |
| Spectral Response | UV = 0.185 – 0.260 μm , IR = 4.4 – 4.6 μm |
| Measuring Performance |
|
| Output Signals | 0 – 20 mA (stepped), HART® |
| Fault Signal | 0 +1 mA |
| BIT Fault Signal | 2 mA ±10 % |
| Normal Signal | 4 mA ±10 % |
| Warning Signa | 16 mA ±5 % |
| Alarm Signal | 20 mA ±5 % |
| Power supply | 24 VDC nominal (18 – 32 VDC) |
| Power Consumption |
|
| Temperature |
|
| Humidity | Up to 95 % non-condensing |
| Material | Stainless steel SS 316L |
| Connecting thread | 2 x 3/4" – 14 NPT or 2 x M25 x 1.5 mm |
| Weight | Detector SS 316L 2.8 kg / aluminum 1.3 kg Tilt mount 1.0 kg |
| Dimensions | 101.6 x 117 x 157 mm |
| Ingress Protection | IP66 and IP67, NEMA 250 6P |
| Approvals | ATEX, IECEx, FM/FMC/CSA, CE marking, SIL2 certified by TÜV (EN 61508) |
